POST-PROCESSOR PRODUCT DESCRIPTION
The Post-Processors (PP) are supplied as a DLL for APT ISO (G-codes).
|
Configurable post-processors. INFORMATION ON GENERIC ISO PP
Configuration window for the generic ISO PP
All settings can be saved (including the name of your machine).
Note: You can enter a name for your program, choose whether or not you want comments, configure start and end blocks for the program, define block format, Block numbering (0 = No block numbering), set arc format, G02/03 IJ or R, define the format for numbers, and specify the type of subroutine. External = O + Number, Internal = N1010 G10 ... , , N1450 G11, n1460 G12N1010 or no sub-program in this case the blocks are simply repeated.
If personalisation is insufficient (which is rare ...), see steps below ...
If you want us to produce a post-processor for your own machine, please send us by e-mail an ISO program, not exceeding 100 lines, comprising:
Your machine type and number Heidenheim, Haas, Fanuc etc...
A contour line, arc, with radius compensation and without.
A tool change (if applicable).
An approach taking into account length correction.
Code list and description for drilling cycles.
A sub-program.
No charge!
Note: You can enter a name for your program, choose whether or not you want comments, configure start and end blocks for the program, define block format, Block numbering (0 = No block numbering), set arc format, G02/03 IJ or R, define the format for numbers, and specify the type of subroutine. External = O + Number, Internal = N1010 G10 ... , , N1450 G11, n1460 G12N1010 or no sub-program in this case the blocks are simply repeated.
If personalisation is insufficient (which is rare ...), see steps below ...
If you want us to produce a post-processor for your own machine, please send us by e-mail an ISO program, not exceeding 100 lines, comprising:
Your machine type and number Heidenheim, Haas, Fanuc etc... A contour line, arc, with radius compensation and without. A tool change (if applicable). An approach taking into account length correction. Code list and description for drilling cycles. A sub-program. No charge!